Product Description
<Required Parts>
・408cc STD fuel tank
・Mount rubber for holding STD fuel tank (on rear side, more than 8mm required).
・PINGEL Power-Flo (fuel valve) + Adaptor for CB400Four(408cc)
･ YR Throttle Holder Set TMR-S / FCR-S
*Only low handled model, STD swtich box can be used. Following parts are required*
･ THROTTLE TUBE (for TMR-S) : P/N 671-320-0000
･ Nut M6 P/N 821-006-1000
･ Throttle wire (Open, Close) : Both throttle wires must be longer (50〜100mm) than STD throttle wire on low handle bar model.
＜Recommended Part＞
CB400FOUR (408cc: 74-77 /398cc: 76-77)FULL SYSTEM STEEL STRAIGHT CYCLONE : JMCA APPROVED P/N 110-441-4640
UNIVERSAL OIL CATCH TANK SET P/N 535-000-x000
Insulator Band (NORMA : 40-60) P/N 855-209-4060
CB400FOUR (408cc: 74-77 /398cc: 76-77)
・408cc STD fuel tank
・Mount rubber for holding STD fuel tank (on rear side, more than 8mm required).
・PINGEL Power-Flo (fuel valve) + Adaptor for CB400Four(408cc)
･ YR Throttle Holder Set TMR-S / FCR-S
*Only low handled model, STD swtich box can be used. Following parts are required*
･ THROTTLE TUBE (for TMR-S) : P/N 671-320-0000
･ Nut M6 P/N 821-006-1000
･ Throttle wire (Open, Close) : Both throttle wires must be longer (50〜100mm) than STD throttle wire on low handle bar model.
| Bore Size (mm) | φ28 |
| Body Interval | 68-67-68 |
| Spigot Diameter (mm) | 28mm |
| Spigot Length (mm) | 27mm |
＜Recommended Part＞
CB400FOUR (408cc: 74-77 /398cc: 76-77)FULL SYSTEM STEEL STRAIGHT CYCLONE : JMCA APPROVED P/N 110-441-4640
UNIVERSAL OIL CATCH TANK SET P/N 535-000-x000
Insulator Band (NORMA : 40-60) P/N 855-209-4060
CB400FOUR (408cc: 74-77 /398cc: 76-77)
